charging material
英 [ˈtʃɑːdʒɪŋ məˈtɪəriəl]
美 [ˈtʃɑːrdʒɪŋ məˈtɪriəl]
网络 炉料
双语例句
- In the furnace body, the medial side of the material charging and discharging opening is equipped with a spiral material guide plate.
在炉体内，位于物料进出口的内侧设有螺旋导料板。 - Design of Charging and Discharging Module for Electronic Character Instrument with Intelligent LiMn_2O_4 Material
智能LiMn2O4材料电特性测试仪的充放电模块设计 - Computer-controlled charging of Slag-forming material during converter steelmaking and the good results that have been achieved are introduced.
介绍了转炉冶炼过程中实现计算机自动控制造渣原料，以及取得的良好的效果。 - Charging/ dis charging Performance of Carbon Nanotubes Used as Ni-MH Battery Cathode Material
碳纳米管用作镍氢电池负极材料的充放电性能研究 - Development and application of steelmaking dust directly charging in sinter mixing material
马钢炼钢污泥直接配入烧结混合料系统的研发及使用 - Plenty of multistage and multi-source oil and gas charging was the material base of oil and gas reservoiring;
充足的多期多源油气注入是油气成藏的物质基础； - Outstanding thermal stability of piezoelectricity for soft PTFE porous film was reported. Influences of poling parameters such as poling time, corona electrical field and charging temperature etc, as well as charge density stored in the material on piezoelectricity were investigated.
还研究了这类柔性多孔膜压电性的突出的热稳定性，考察了充电参数如充电时间、充电温度和电晕电场等及储存的电荷密度对这类双层膜的压电活性的影响。 - In addition, the agitation strength, the concentration of the raw material, the aging time, the charging method of raw material and some other factors were also studied.
此外，还分析了搅拌强度、加料方式、反应物浓度、陈化时间等因素对Ni（OH）2性能的影响。 - The similarities and differences of charging process of the material with different characteristics of secondary electron emission characteristic is compared.
从最大二次电子发射系数δm和δm对应的能量Em这2个方面，比较了不同二次电子发射特性下表面充电过程及最终平衡电位的异同。 - In the end, based on the charging model, the optimize system of charging is established, namely, the best charging system would be searched to achieve the ideal burden distribution of material and the ratio of ore to coke.
最后，在预测炉料分布的基础上，建立布料制度的最优控制机制，即搜索最佳的布料制度，以达到最终得到理想的炉料分布和矿焦比的目标，来调整或改善炉况。 - The charging/ discharging performances of Zn/ Ni experimental batteries with Ni/ Al ( OH)_ xas the positive electrode active material were measured.
测试了用Ni/Al（OH）x为正极活性物质的Zn/Ni实验电池的充放电性能。 - The simulation results in this thesis can provide reference data for charging, deflection, deposition, and solidification of droplets, laying a theoretical foundation for the realization of droplet deposition increasing material manufacturing technique and the proper determination of process parameters.
本文模拟结果可以为液滴的充电、偏转和沉积固化过程提供参考数据，为液滴沉积增材制造工艺的实现和工艺参数的合理选取奠定了理论基础。 - The improved system can not only realize accurate and stable control of raw material but also store and manage the charging data, so that production process automation and material management are combined organically.
改进后的配料系统不但能实现精确、稳定地配料，还实现了装料数据的存储和管理，使生产过程自动化与物业管理有机地结合起来。 - In this paper the influence of heat treatment ( including ageing or annealing after corona charging at high temperature and corona charging at normal temperature as well as quenching before charging) on the stability of the charge storage of electret material of high polymer film is described.
本文讨论了热处理（包括高温电晕充电，常温电晕充电后的老化（或退火），以及充电前的淬火）对高聚物薄膜驻极体材料的电荷贮存稳定性的影响。 - The investigation of degradation mechanism of VRLA batteries reveals that the conditions of multi-stage constant-current charging suppress softening of positive active material and sulfating of negative active material.
对电池性能衰减机理的研究表明：采用分段恒流充电能抑制VRLA电池正极板活性物质的软化和负极板活性物质的硫酸盐化。 - Based on mass and thermal balances in steelmaking process and the physicochemical of metallurgical reaction, the model performed charging calculation of converter process from raw material preparation to steel treatment.
以转炉冶炼过程的物料平衡、热量平衡关系以及炼钢反应的理化原理为依据，该模型完成了转炉冶炼从备料到钢水处理各阶段的下料计算。 - The influences of charging parameters on piezoelectricity were also explained by means of charge dynamic character and the material property.
充电参数对压电性的影响还借助于电荷动力学规律和材料性质进行了解释。 - However, due to their serious volume change when charging and discharging, leading to fast capacity fading and poor cycle performance, it is a great impact to the material of its practical value.
但由于它们在充放电过程中存在严重的体积膨胀收缩，导致容量衰减较快，循环性能较差，极大的影响了材料的实用价值。 - Carry out air charging experiment in water, and discuss the difference between the two different types of jet aerator in the different operating parameters, structural parameters and material parameters. Explore the laws of impacting on gas holdup in flotation column.
探讨了不同操作参数、结构参数和物性参数下，两种不同类型气泡发生器对浮选柱的充气性能，并探索了影响浮选柱内气含率因素的规律。 - The charge quantity of friction charging of grain is related with the quantitative difference between the dielectric constants of grain and frictional material. The larger the difference is, the more the charge quantity is.
两摩擦材料介电常数的差越大，摩擦电量也就越多。 - The charge character of friction charging of grain is related with the dielectric constants of grain and frictional material.
谷物的摩擦带电的电性与其和摩擦材料的介电常数有关。 - This method can reduce gassing and thermo runaway while charging, increase margin of safety, shorten charge time, prolong the battery actual life for 20% and save plenty of manpower and material resources.
此举能减小充电过程中所出现的析气、热失控等现象，增大安全裕度、缩短充电时间、延长蓄电池实际寿命20%，节省了大量的人力物力。 - Process preparation experiments included the selection of slag styles and the determination of slag viscosity; the performance mensuration of charging material bearing chromite during smelting dropping; and the determination of liquidus line and the flowing property of master alloys.
工艺准备实验中主要进行了渣型的选择及炉渣粘度的测定；含铬炉料的熔融滴下性能的测定；不锈钢母液液相线及其流动性能的测定。 - But also the predict model connect with charging system, which make it became reality that computer autocontrol charge process according to the material quantity determined by the model.
并使预报模型与加料系统连接，实现了计算机按预报模型确定的原料加入量自动控制加料过程。